Elite Water Heater Services

Why Does My Electric Water Heater Reset Button Keep Tripping?

Electric water heater reset button keeps tripping? Learn why — thermostat, element and wiring faults — and what to do next.

The reset button on an electric water heater — the high-limit switch — trips when the water gets too hot. When it keeps tripping, it is doing its job: something is making the water overheat, and the switch is stopping it.

The usual causes are a failed thermostat, a shorted heating element, or a wiring fault. Do not keep resetting a button that trips again.

Why the reset button trips

A thermostat stuck in the on position lets the element heat the water past the safe limit, and the high-limit switch trips. A heating element that has shorted to earth can also trip it. Loose wiring or a failing breaker can trip it too.

Water that is scalding hot before the button trips is a sign the thermostat has failed. Turn the heater off at the breaker and call a provider.

What to do

You can press the reset button once. If it trips again, switch the heater off at the breaker and call a provider. Do not bypass the switch or tape the button down — it is a safety device. Call (480) 919-8156 to check availability in your area.

Frequently Asked Questions

Usually a failed thermostat, a shorted heating element, or a wiring fault. A provider tests the unit to find which one.

It means the water is overheating, which is dangerous. Turn the heater off at the breaker and call a provider.

It is electrical work on a water-filled tank. Elite recommends a qualified provider.

Follow Us on Socials
FacebookInstagramPinterest
Call Now: (480) 919-8156