Elite Water Heater Services

Water Heater Inspection Checklist

Water heater inspection checklist: the checks a provider makes — tank, valves, venting, wiring and pressure — and what they mean.

A water heater inspection checklist is the list of checks a provider makes when they look at a unit: the tank, the connections, the venting or wiring, the pressure relief valve, the anode rod and the water pressure.

This guide explains each check and what it tells you about the heater's condition and remaining life.

The checklist

Tank: leaks, rust, corrosion at the base and the seams. Connections: inlet, outlet and gas or electrical connections, and the shut-off valve. Relief valve: lifts and reseats, discharge pipe routed correctly. Anode rod: condition and remaining metal. Venting or wiring: correct, undamaged, clear. Pressure: static pressure and pressure rise during heating. Temperature: setting and actual temperature at a tap. Age: the unit's age against its expected life.

A provider notes each item and tells you in plain terms whether the unit is sound, needs a part, or is near the end of its life.

When to use the checklist

Before buying a home, when a heater passes ten years old, when you notice a new noise or a change in the water, and as part of an annual maintenance visit. Call (480) 919-8156 to check availability in your area.

Frequently Asked Questions

Leaks, rust, the relief valve, the anode rod, the venting or wiring, the water pressure and the temperature — and the unit's age.

Usually under an hour. If the anode rod needs checking, allow a little longer.

An inspection is usually part of a service visit. Your provider gives you their own price.

Follow Us on Socials
FacebookInstagramPinterest
Call Now: (480) 919-8156