Elite Water Heater Services

How to Descale a Tankless Water Heater

How to descale a tankless water heater: the flush that removes scale from the heat exchanger, and when to call a provider.

Descaling a tankless water heater means circulating a descaling solution through the heat exchanger to dissolve the mineral scale that builds up inside it. Scale is the main enemy of a tankless unit — it cuts efficiency, causes error codes and shortens the unit's life.

This guide explains the process. It involves the water and gas or electrical connections, so if any step is unclear, call a provider rather than improvising.

Before you start

Turn the unit off and close the isolation valves. You need a submersible pump, a bucket, hoses and a descaling solution made for tankless units — usually white vinegar or a citric-acid solution, as the manual specifies.

Your unit's manual gives the exact procedure for your model. Follow it, not a generic video.

The descaling flush

Connect the pump and hoses to the service valves, circulate the solution through the heat exchanger for 45 to 60 minutes, then flush with clean water and clean the inlet filter. Reopen the isolation valves and restart the unit.

If the unit has never been descaled and the scale is heavy, a provider may need to do the job — heavy scale can need a longer flush or a stronger solution. Call (480) 919-8156 to check availability in your area.

Frequently Asked Questions

At least once a year, and twice a year in hard-water areas. The manual gives the exact interval for your model.

It is possible with the right equipment and the manual's procedure. If any step is unclear, call a provider.

Scale builds up, efficiency falls, error codes appear, and the unit fails years early.

Follow Us on Socials
FacebookInstagramPinterest
Call Now: (480) 919-8156